Cara Untuk Mengatasi Masalah Boot HyppTV STB Huawei EC6108V8 Putih


1. Download fail update.zip
2. Masukkan fail update.zip ke dalam pendrive (root folder)
3. Tekan butang OFF di belakang HyppTV STB
4. Tekan banyak kali butang MERAH pada remote dan pada masa yang sama tekan butang ON pada belakang HyppTV STB sehingga keluar recovery menu
5. Pilih update from external storage & cari fail update.zip
6. Tunggu sehingga selesai & boot

Himedia Q1, Q3, Q5, Q8, Q10, M3, H8, M6, Q10 Pro, Q5, Pro, H8 Plus, H8 Lite Firmware Update



Download Himedia Firmware Update

Firmware Upgrade by Recovery Mode (user data will be cleared)

1.Download a new firmware and place the firmware onto the ROOT directory of a USB drive.
2. Plug the USB drive into an empty USB HOST on the SMART TV BOX.
3.With the SMART TV BOX turned off,use a paper clip or pen point to press and hold the small pinhole restore button on the SMART TV BOX
4.While pressing the restore button,turn on the SMART TV BOX. Continue to hold the restore button for 5 more seconds,then release it.
5.The SMART TV BOX will begin upgrading the firmware from the USB drive.
6. Wait for the SMART TV BOX to complete the upgrade. Please be patient as it may take around 5 minutes to complete.
7. When finished, The SMART TV BOX will auto reboot.

Firmware upgrade from Settings Menu (user data will not be cleared)

1.Download a new firmware and place the firmware onto the ROOT directory of a USB drive.
2.Plug the USB drive into an empty USB HOST on the SMART TV BOX.
3.Go to Settings→System→System upgrade to select/click the letter of the USB drive.
4.The SMART TV BOX will begin upgrading the firmware from the USB drive.
5. Wait for the SMART TV BOX to complete the upgrade. Please be patient as it may take around 5 minutes to complete.
6. When finished, The SMART TV BOX will auto reboot.


IPV6 Setup Asus RT-N66U Advanced Tomato Firmware Unifi


















1. Login to Advanced Tomato Control Panel
2. Go to Basic Settings
3. Go to IPV6
4. Choose DHCPv6 with Prefix Delegation
5. Prefix Length 64
6. Request PD Only, Tick
7. Static DNS Leave Blank
8. Accept RA from, tick WAN
9. Save, DONE!!
10. Go to http://adf.ly/1eXlWW to test your IPV6 connectivity